Have you observed that your watch hand no longer ticks correctly? Apart from the need to change the watch battery in such a situation, you should find what is wrong with the hands. Different issues may be responsible for the hands not working as expected. Sometimes, the second hand could skip to send you a message about the battery. At other times, it could signal the need for maintenance. Read through this post to learn what to do if your watch hand cannot work correctly.

Problems with Watch Hand

Most watches have the second, minute, and hour hands. All three hands tick in accordance to the battery and electronic design. Some watches don’t come with the second hand, and this is often as a consequence of the longer lifespan of their batteries.

When your watch hand cannot work, it may be a battery end-of-life indicator. This often plays out as the second hand skipping many times at once. Some watches have electric circuits that enable their wearers know that the battery voltage is reduced and a new battery is required. As soon as have a battery replacement, you can expect that the second hand will resume its normal functions.

You may also notice that the second hand ticks back and forth and doesn’t provide accurate time. In this case, a trusted solution is servicing of the watch movement. The problem isn’t with the battery but with the mechanical function of the parts of the watch. Hence, you should consider taking the watch to a watch mender or watch shop for maintenance.

If you observe that your watch hands aren’t lined up correctly and don’t produce accurate time, you may need to reset them. Get a thin blade, tweezers, and an instrument with a pointed tip. Remove the watch straps and the lugs. Next, take off the watch buckle and the plastic holder using the tweezers.

Once you’ve come close to the watch hands, be careful not to scratch the watch face. Pop the watch hands out by pulling them gently with the tweezers. Align the hour hand to 3 o’clock, the minute hand to12 o’clock, and the second hand just around the minute hand. Ensure that all the hands are well placed and fitted firmly using the tweezers, and replace the other parts reversing the initial removal method you used.

Note that most watch hands don’t always line up accurately. It may be a design on the part of the manufacturer to monitor how the watch performs over time. In other cases, this so-called misalignment may just be results of wear and response to use. Don’t always assume that misaligned hands make up a problem that needs to be fixed. Instead, consider it a part of your watch mechanism.

If you feel convinced that your watch hands aren’t moving well, set them again. Place the minute hand on the exact minute mark and the second hand just around it, then go ahead to restart the watch.

With the tips discussed in this post, the next time your watch hand cannot work, you should know exactly what to do and how.

Phone: 0049 15123064313
E-mail: ethel.jiang@zstime.com